Posted on 53 Comments

How to Cure Vanilla Beans, Part 1

I occa­sion­al­ly get ques­tions from peo­ple who are grow­ing their own vanil­la and want to know the best way to cure the beans. Getting a good cure out of your beans can be a lit­tle chal­leng­ing, but hope­ful­ly, this guide will make it easier.

This guide is spe­cif­ic to the cur­ing method we use here on Kauai. It is adapt­ed from the “bour­bon” method used in equa­to­r­i­al areas. Kauai is too cool and cloudy dur­ing the cur­ing sea­son to rely on the sun for heat­ing the beans, so we use elec­tric­i­ty to main­tain cur­ing temperatures.

It is essen­tial that vanil­la be prop­er­ly cured in order to obtain the desired aro­ma and fla­vor from your vanil­la beans. Processing vanil­la beans is a mat­ter of sup­port­ing both the vanillin devel­op­ment and the slow dry­ing of the bean in order to pre­serve it.

The instruc­tions here are for vanil­la plan­i­fo­lia beans. There are 3 types of vanil­la beans: Bourbon (vanil­la plan­i­fo­lia), Tahitian (vanil­la tahiten­sis), and Pompona (vanil­la pom­pona). Each type has a some­what dif­fer­ent cur­ing process, although the vanillin chem­istry is gen­er­al­ly the same. Planifolia is the one most wide­ly used for vanil­la production.

Equipment You’ll Need

In order to cure your vanil­la, there are a few essen­tial pieces of equip­ment you’ll need.

  • Big pot for killing/thawing the beans
  • Freezer (if you’re freez­ing them)
  • Food Dehydrator
  • 48 qt. Cooler
  • 2 Gallon Jugs
  • Kitchen Towel
  • Thermometer (spike or infrared ther­mome­ter for food applications)
  • 1 Gallon Plastic Zipper Bags

The food dehy­dra­tor is the most sub­stan­tial item here, the wide­ly-avail­able Excalibur is a good choice. It’s best to have one that uses a fan to cir­cu­late the air and has a tem­per­a­ture control.

The cool­er should be one that is well-insu­lat­ed with thick walls and lid. Thin, inex­pen­sive plas­tic or sty­ro­foam cool­ers can be used, but it’s hard­er to main­tain the inter­nal tem­per­a­ture with those. The cool­er needs to be big enough for the two gal­lon jugs, leav­ing room for your cur­ing vanil­la. The com­mon 48 qt. size works well.

The freez­er is to store your ripe beans until they can be cured. If you’re blessed with a large har­vest (8 ounces/25 beans or more), you can skip the freez­ing part, and you’ll get bet­ter results. The ther­mome­ter is need­ed to to mon­i­tor the tem­per­a­ture, and zip­per bags are what you use to hold the cur­ing beans.

Start With Ripe Vanilla Beans

One of the most impor­tant ingre­di­ents for a suc­cess­ful cure is to start with ripe beans. A ripe vanil­la bean will be yel­low­ing at the tip and show­ing the ear­ly signs of split­ting, or it’s begin­ning to split. The pho­to at the top of this arti­cle shows what ripe beans look like. The yel­low­ing should ide­al­ly be pret­ty dark yellow/orange, not just pale green.

The ripen­ing is impor­tant because the vanil­la fla­vor is derived from the sug­ars that devel­op as the bean ripens. You want max­i­mum sug­ar devel­op­ment for two rea­sons: strongest fla­vor and the sug­ars act to pre­serve the bean once it’s cured.

Beginning the Curing Process

Ripe vanil­la beans, once picked, should be cured right away. You should begin cur­ing the beans with­in 24 hours of picking.

The first step is called “killing” and what it does is stop the ripen­ing process and open the cell walls to release the enzymes and vanillin pre­cur­sors. There are sev­er­al ways to kill your beans, but for most hob­by­ist grow­ers, freez­ing is very practical.

Freezing the beans works well if you’ve got a small num­ber of vanil­la plants. The beans on your plants are not going to ripen at the same time, you’ll be har­vest­ing a few each cou­ple of days. As each bean ripens, put them into a freez­er bag in your freez­er until all your beans have ripened.

By doing it this way, your many small har­vests will be com­bined into a sin­gle batch the be cured. This will make the cur­ing process a lot eas­i­er to man­age, and get you clos­er to the opti­mal cur­ing batch size, which is about 1 pound of green beans.

If your har­vest is 8 ounces or more (about 25 beans), you can and should cure your beans imme­di­ate­ly, skip­ping the freez­ing part.

Setting Up The Sweat

Then next stage of the cur­ing process is called the “sweat.” This is because the beans seem to sweat out mois­ture, which is nec­es­sary to get the chem­i­cal reac­tions going.

In very sim­ple terms, the process we are fos­ter­ing here is the enzy­mat­ic break­down of the glu­co-vanillins that are present in the ripe pod into two com­po­nents: vanillin and glu­cose. Vanillin is the fla­vor and aro­ma of vanil­la and glu­cose is an essen­tial nat­ur­al preser­v­a­tive to pre­vent the bean rot­ting or molding.

When you’ve har­vest­ed all your ripened beans and they have been in the freez­er for at least 24 hours, you’re ready to begin sweating. 

Prepare your sweat box (the cool­er) by fill­ing the jugs with hot tap water. This will typ­i­cal­ly be about 120℉. Place them in the cool­er with space between them for the vanil­la. Put a rolled-up tow­el (one you don’t mind get­ting wet and pos­si­bly stained) into the gap. The sweat­ing vanil­la will go on top of the tow­el, which pre­vents it from sit­ting in any mois­ture that might col­lect on the bot­tom of the cooler.

Killing” the Beans

To pre­pare the beans for cur­ing, they must be treat­ed to pre­vent them from ripen­ing fur­ther dur­ing cur­ing. This also ful­fills the crit­i­cal func­tion of ini­tial­iz­ing the enzy­mat­ic process that devel­ops the vanillin in the bean. Traditionally, “killing” is done in the sun or in hot water. Freezing accom­plish­es the same goal, while hold­ing the beans until you are ready to take them to the next step.

For beans that were frozen, we only need to thaw and warm them.

We used to do this in the food dehy­dra­tor, but I’ve found the results are bet­ter using a hot water bath. Get a large pot of water hot, not boil­ing, should be about 130–150℉. Put your frozen beans into the big pot of hot water for a minute or two, just enough to get the beans warm. You want to use a big pot for this, as the frozen beans will cool the water. If there is more water, this will be less of an issue.

For fresh/not frozen beans, we keep them in the hot water bath for 2 1/2 to 3 min­utes depend­ing on the size of the bean.

Place the thawed/killed beans into a freez­er bag. If you do have more than about one pound of beans, split it into two bags. Label the bag with the date, and place in the sweat box, on the tow­el between the hot water jugs. Keep the lid closed.

In the next part, we get into how to com­plete the sweat­ing process and how to dry and age the beans…

53 thoughts on “How to Cure Vanilla Beans, Part 1

  1. […] Part 1, I explained how to har­vest and pre­pare the beans for cur­ing, and what equip­ment you’ll […]

    1. Thank you for your great post..I want know something..when we sun dry vanil­la we use a blan­ket and rolle it with beens and put in to the sweat box..When we dehigh­drate beens should­nt we rolled with that types of cloth

      1. Hi Imalka,

        The method you describe is dif­fer­ent from the method we use, so I don’t have the expe­ri­ence give you a good answer to your question. 

        We don’t use the sun, it’s not hot enough here in Hawaii in the late winter/early spring when we are har­vest­ing and cur­ing our beans. Instead of blan­kets, we use plas­tic bags to keep the beans moist for a longer peri­od of time, and the sweat box is elec­tri­cal­ly heated.

        Good luck with cur­ing your harvest!

  2. Hi

    Do you give tours, or can we see your farms? I’m a vanil­la fanat­ic, and it sounds incred­i­ble what you. Would love to see your work. 

    Thanks!!
    Dave and Wendy Pruett

    1. Yes, we do indeed give tours. Take a look at the Vanillery Tours page for details.

  3. Hi ,
    I am from Bangalore, India and we got our first lot of vanil­la pods last year in March. A small lot of 15 beans !! We have har­vest­ed it (2020) and now kept for drying.
    The beans are not ful­ly dried , but maybe a few days away. The room will be full of vanil­la smell when we return in the evening. 

    My ques­tion is: For home use, do I need to dry the beans com­plete­ly or can I use them when they are still not ful­ly wrin­kled and bit leath­ery to touch.

    1. Hi Ranjit,

      In most cas­es, if it’s not ful­ly wrin­kled, it’s not ready yet. When I am check­ing the beans for dry­ness, the out­side appear­ance is a clue, but the real test is squeez­ing the bean a lit­tle to feel what’s going on inside. A fin­ished bean will still be soft, but it should not feel “slip­pery” inside, as though the insides were still liq­uid. It will feel a bit firm, like a dried fruit. 

      Getting this right is a mat­ter of expe­ri­ence, so do your best and pay atten­tion to the results.

      If you’re mak­ing extract, bet­ter to let the bean get drier. 

      Another impor­tant thing to look for is the skin of the bean should be shiny, almost oily in appear­ance. If it is dry and dull in appear­ance, there is a good chance it will mold. The shini­ness comes from prop­er cur­ing of a ripe bean. 

      If you store a bean that is not dry enough, it may spoil and get off-flavors.

      1. Thank you Roland.
        I was also exper­i­ment­ing with ripen­ing the beans on the plant itself (till they take a light brown col­or) and then keep them for dry­ing. I observed, that the beans split if you keep it on plant for ripening. 

        As we are doing it for hob­by in small quan­ti­ty (2/3 plants, 15–30 beans at max), mon­i­tor­ing is not an issue. 

        Do you have any rec­om­men­da­tions? Which is bet­ter: nat­ur­al ripen­ing or artificial?

        Regards,

        1. Natural ripen­ing will not devel­op as much fla­vor as doing a prop­er cure. First, the con­di­tions in the sweat box are ide­al for the devel­op­ment of the vanillin, also the split­ting of the bean is pre­vent­ed, which keeps the vanillin con­tained with­in the bean.

          I have also exper­i­ment­ed with nat­ur­al cur­ing out of curios­i­ty, and I have got­ten usable vanil­la out of it, but it was not very strong in fla­vor, and the bean was not well preserved.

  4. Hi Roland,

    What do you do with 1/2 cracked beans found on vine?

    1. Just cure them along with all the oth­ers, they’ll dry out a bit faster, but are fine to use for extract once cured.

      1. Hello sir,
        ‘we need you help to cure vanil­la, so that we can get best quality

  5. […] arti­cle is an addi­tion to the 2‑part How to Cure Vanilla Beans […]

  6. Thanks for the Information.. 

    Do you have mar­kets to rec­om­mend to us so we can sell our Vanilla Beans using your cur­ing methods.

    1. Hi Ambrose,

      This is very dif­fi­cult advice to give, because each local­i­ty is going to have its own ways of buy­ing and sell­ing local­ly grown vanil­la. If you don’t have access to a buy­er in your area, it is pos­si­ble to sell beans direct­ly to some online retail­ers. For exam­ple Jones & Co. sells vanil­la from small farm­ers, so they may be inter­est­ed in sourc­ing your beans. You will need to be pre­pared to ship your beans internationally.

      Good luck!

      1. Thank You for your response.. We are a Papua New Guinea Vanilla Beans exporter to Hong Kong and Indonesia since 2002..(but in small quan­ti­ties, as required by these mar­kets). We came to you to assist if pos­si­ble to iden­ti­fy buy­ers who are able to move larg­er quan­ti­ties (1,0000kg) per month..) You have con­tact details for Jones & Sons… Thank you..

        Ambrose Guarakai
        Bogia Spice Exporters
        Papua New Guinea

        1. I don’t have those con­tacts, I’m sor­ry, I’m just a small farmer, I most­ly sell local­ly and on our web­site. I sug­gest you con­tact online retail­ers direct­ly throught their website.

  7. Oops. I put brown but wet beans (from Mexico) into alco­hol to make extract. Now they are sit­ting in alco­hol shred­ded. Do I fish them out and let them dry and return them to the alchol. Wish I had vis­it­ed your web­site beforehand!

    1. Hi Emily,

      Yes, prob­a­bly the best thing to do is take those beans back out of the alco­hol and dry them slow­ly. If they smell good, go ahead with the extrac­tion process after that. How did you get those beans in the first place?

      1. Thank you Roland! My Mexican friend brought them for me. I have nev­er seen any­thing but the with­ered dry beans until these. The thing is I shred­ded (not chopped) the beans when I put them in the over­proof alco­hol. I will strain out every­thing and leave them to dry in the Texas sun. I won’t rinse them though. Correct?

        Appreciate your help!

        E

  8. Can you dry beans in a sun­ny window?
    The beans look Good not mold­ing like the ones I sun dried.

    1. You can get away with this if the beans were prop­er­ly sweat­ed. The “sweat” pro­tects the beans from mold. If the beans don’t come out of the sweat box with a nice sheen to them, they are like­ly to mold…depends on the humid­i­ty where you are, but gen­er­al­ly, it’s much safer to use a food dehy­dra­tor on low temp with cir­cu­lat­ing air to help pre­vent mold.

  9. Hello Roland,
    I want­ed to ask your opin­ion on the ripeness of my beans. They flow­ered in 2020 in march/april/may and still haven’t turned to the yel­low every­one men­tions as a sign they are ready.

    I was hop­ing I could post a pic or two for you too look at to get your opinion.

    I’m in Waialua (on Oahu) so while like­ly dry­er than your loca­tion the cli­mate is similar.

    Thanks

    Dominick

    1. It’s not quite time yet…expect to see ripen­ing soon, how­ev­er. My beans are still green also.

  10. Hi Roland,

    This is first year that we have processed beans (small nos). However, the dried beans do not smell of vanil­la and when I boil the seeds in water, I am not get­ting any vanil­la smell. Am I miss­ing something.

    Regards

    1. Wow, I’m sor­ry to hear that. Vanilla does­n’t smell like vanil­la unless it’s prop­er­ly cured…as you prob­a­bly know. The steps I describe in these arti­cles will help you on cur­ing your next har­vest. The most impor­tant points:

      1. Harvest only ripe beans, very important
      2. Keep them in the freez­er until you have a large enough quan­ti­ty (about 1 lb/0.5Kg) to sweat them or you have har­vest­ed all your beans
      3. Sweat them for 18 days in a moist, warm envi­ron­ment, dry­ing them for a lit­tle bit every day.
      4. Slowly dry them after the sweat until they are firm but still pliable
      5. Age them for sev­er­al months before using

  11. Hello, Thank you so much for your assis­tance. Do fer­til­ize dur­ing the flow­er­ing process to bring on more flow­ers? What process to help this?Wonderful infor­ma­tion. I am doing the process where as soon as the tip have a yel­low appear­ance I pick them. I place them in 160 degree water for 2minutes then wrap in a woolen cloth for 2 days. I then sun for two hours and wrap in plas­tic over night then sun again each day. My prob­lem is they are shiny but some dry to wood. Then I don’t know what to do with them. I wish I could find a visu­al of when to stop the dry­ing process. How do you mea­sure the. Moisture con­tent please? Also what do you store them in and how do you heat the box. It is con­fus­ing no site actu­al­ly shows you the box­es wraps,wax paper plas­tic vac­u­um seals so a lot can be mis­in­ter­pret­ed. Please help me. Forever grateful.

    1. Hi Janine and thank you for your ques­tions, I’m hap­py to help peo­ple get a bet­ter cure with their vanil­la beans.

      Our process dif­fers sig­nif­i­cant­ly from the process used by oth­er vanil­la pro­duc­ers, part­ly because we don’t have sun­ny days and a lot of heat dur­ing our cur­ing sea­son here in Hawaii, which is January — March.

      First, we wrap the beans in plas­tic bags for the sweat, we want to retain as much of the mois­ture as pos­si­ble. We don’t use wool cloth, we think it dries them out too quick­ly. During the sweat process, we dry the beans a lit­tle bit each day. We use an elec­tric food dehy­dra­tor, but you can do it in the sun if that works in your loca­tion. The idea is that the beans dry out very, very slow­ly dur­ing the sweat by keep­ing them in plas­tic bags all the time, except for the brief dai­ly drying.

      The sweat is done in an insu­lat­ed box and kept at about 115℉ with a heat­ing ele­ment, but that can be done with hot water bot­tles too.

      When the sweat is com­plete after 18 days, then we begin to dry the beans, which we do in an open-air dry­ing rack pro­tect­ed from sun and rain. Once the beans go on the rack, we check them every few days and remove the beans that have dried enough. At that point, they will be sup­ple, eas­i­ly bent, but won’t feel “slip­pery” inside. Hard to describe with words, you have to use your expe­ri­ence for this.

      Once the beans have dried enough, we put them into plas­tic bags for aging, a min­i­mum of 3 months. After that they are ready to be used. A prop­er­ly cured bean will be soft, shiny and a bit oily to the touch. If it is like that, it won’t mold. We have very lit­tle issue with mold here, it hap­pens rarely and only on over­ripe beans.

      It is hard to find detailed infor­ma­tion about cur­ing vanil­la, and most of it only applies to large-scale oper­a­tions. We worked most of it out over the years with exper­i­men­ta­tion and the very good infor­ma­tion con­tained in The Vanilla Handbook by Piero Banchessi.

      1. Hello Roland,
        Before keep­ing in plas­tic bag for sweat process, do you do a heat/cold treat­ment of beans? We are still not able to get it right. The beans dry out shiny and soft, but no flavor.

        Regards,
        Ranjit

        1. The beans must be “killed” before sweat­ing. This is described in the process above…the beans are placed in 150°F water for 3 min­utes, then put them in the plas­tic bags and then the sweat box.

          It’s very impor­tant that the beans be ful­ly ripe before pick­ing and cur­ing. If they are picked ear­ly or drop off of the vine, they are like­ly not going be of good quality.

          1. Thank you. We pick the beans when one end start to turn yel­low. If you keep for more days, then the end turns black and bean splits. 

            Will try again this year.
            Regards,

          2. That’s correct…just mak­ing sure you’re using ripe beans.

  12. could you please make us a video of the cur­ing process and we get to see how its actu­al­ly done

    1. This is a good idea…when we are in cur­ing sea­son, I will do that.

  13. Are the beans ruined if I have fun­gus on them? I left them in the “sweat” box for 4 days, for­got to 1dry them. I am dry­ing them now, but a few show fun­gus. Will they be ok or should I throw them out? Thanks

    1. If it’s white mold you’re see­ing, it’s not too bad, just cut it off and con­tin­ue with the sweat. I’ve nev­er seen this in the sweat, though, so if there is a “moldy” smell, you may want to throw them out. The white mold we see on occa­sion does­n’t have a smell, and we only see it on over­ripe beans after they have been dried and are aging.

      Are you get­ting a good sweat? The mois­ture is glu­cose which will help pre­vent mold. Also, make sure the tem­per­a­ture is right…too cold or too hot can cause problems.

  14. I,m Muhammad from Malaysia.I wish to thanks you very much Roland, for your good design for Making Vanilla Sweat Box. Without your help, I will nev­er ever man­aged to have a ‘nice’ Vanilla Swear Box.

    1. you are wel­come, good luck with your vanilla!

  15. Hi Roland,
    We have a home gar­den and this year we got 25 beans. As they ripened, I stored them in freez­er. Now they are ready for next steps. Please help, as so far (two times) we are not suc­cess­ful in get­ting finin­shed prod­uct. The beans always turn out to be woody in flavour. Though while dry­ing, they do smell of vanilla.

    Regards,

    1. First, this advice is for vanil­la plan­i­fo­lia (just to make that clear). Woody beans usu­al­ly indi­cates they were har­vest­ed too ear­ly. Make sure your beans are ful­ly ripe before har­vest­ing: the tips of the beans should be turn­ing yel­low and they look like they’re about to open.

      When you are ready to cure the vanil­la, get a large pot of water hot: 150°F (65°C) make sure you mea­sure the temp, too hot will destroy the fla­vor. Put the frozen beans in there for a minute or so. You just want to get them hot, so take out the largest one and feel it, it should be hot. Soon as they are hot take them out of the water and let them drip. Put them into a plas­tic bag and the sweat box while they are still hot.

      The arti­cle describes how to do the sweating.

      1. Thank you

  16. Can you sweat the beans using a tow­el in a sealed bag and sub­merged in a sous vide, since the tem­per­a­ture can be con­trolled precisely.

    1. Yes, that seems pos­si­ble, although I’ve nev­er tried this.

      I would not use the tow­el, since I think it best to keep the mois­ture in the process. This mois­ture is glu­cose, and in the dry cycle, it coats the bean sur­face and acts as a preser­v­a­tive. The sec­ond thing I would rec­om­mend there is use a ziplock bag (keep the zip­per above the water prob­a­bly) so you can take the beans out reg­u­lar­ly for the 1 hour dry cycle in the dehy­dra­tor. If you don’t do this, there’s a chance the beans will begin to decompose.

      1. I was think­ing tow­el so that the mois­ture and glu­cose don’t become too much (like a soup) in a closed bag. The sweat box method rec­om­mend­ed a tow­el under or around the beans. I guess it’ll be an exper­i­ment. I have time to wait, as my vines haven’t start­ed mak­ing any flow­ers yet. Trying to research between now and then, Thanks!

        1. Yes, it can get pret­ty wet in there at first, but with time all the mois­ture dries up. The approach I take is to hang on to all the mois­ture because I think it helps cure the beans better.

          A key point to this is in the scald, beans that were over­heat­ed in the water kill will release all their mois­ture very quick­ly at the begin­ning of the sweat. We are very care­ful not to over­heat the beans in the water kill.

  17. Roland!
    I just have to thank you for your instruc­tions on how to cure vanilla.
    I live in Queensland, Australia (sub trop­i­cal) and although we have a hot cli­mate, the beans are ready for pick­ing in our cool­er months, so the sun is not hot enough to cure the beans. I fol­lowed your instruc­tions with the food dehy­dra­tor and my lit­tle har­vest of 30 beans are beau­ti­ful and smell divine.
    The first suc­cess in the few years I have had my vine!
    I do have a query: I live in a small sub­ur­ban house block, so space is lim­it­ed. I have two vines, one is in the shade all day and does­n’t pro­duce flow­ers, the oth­er has pro­duced around 30 beans for the last two years.
    This year, my pro­duc­ing vine (about 6 ft tall) has only pro­duced two lots of flow­ers and I will be lucky to get 8 beans. We have had unsea­son­ably heavy rain this year-does this make a dif­fer­ence? Do the vines stop pro­duc­ing after awhile and do I need to plant more? If so, I will need to pro­pogate as vanil­la plants are very rare here and I was extreme­ly lucky to find my orig­i­nal piece.
    I have tried pro­pogat­ing, my first attempt was suc­ces­ful, but attempts this last year have result­ed in the plants remain­ing alive, but look­ing sad and not pro­duc­ing roots or get­ting big­ger. Obviously there is an art to this- I would appre­ci­ate your advice.
    I am off to make vanil­la extract!
    Again, thank you so much
    Marguerite

    1. Hi Marguerite, sound like things are going OK with your vanil­la, but could be bet­ter. Vanilla vines will grow con­tin­u­ous­ly, and under good con­di­tions, they will con­tin­ue to get larg­er and pro­duce more. Once a sec­tion of vine flow­ers, it won’t flower again and it will even­tu­al­ly die. However, the rest of the plant con­tin­ues to grow and set down roots, so the plant keeps grow­ing basi­cal­ly for­ev­er. You don’t need to replace the plants, just keep them happy.

      One impor­tant thing a vanil­la plant needs in order to keep grow­ing is mulch. This mulch should be pro­vid­ing the plan­t’s roots with pro­tec­tion from the sun and also a steady sup­ply of decom­pos­ing organ­ic mat­ter which the plant feeds on. This should near­ly always be moist. Vanilla pro­duces what are called feed­er roots that extend from the vine to the ground, which you have no doubt seen. They will go under the mulch, but don’t pen­e­trate the soil. For this rea­son, vanil­la is tol­er­ant of very wet con­di­tions (short of being in a swamp!)…so you don’t need to wor­ry that it’s get­ting too wet or there’s too much rain.

      Feeder roots are essen­tial to the plan­t’s growth, so if for one rea­son or anoth­er new feed­er roots are unable to estab­lish them­selves, the vine will die out. The fact that your vine is not get­ting big­ger and pro­duc­ing more flow­ers every year sug­gests it’s not get­ting the grow­ing con­di­tions it needs. This is most like­ly not enough mulch and maybe too much sun. Vanilla also does­n’t like hav­ing it’s roots dis­turbed, so if any­thing like that is going on (for us it’s chick­ens scratch­ing) you should take steps to pro­tect the roots. Since the roots are sit­ting on the sur­face, they are quite vul­ner­a­ble to this.

      As to prop­a­gat­ing, it can cer­tain­ly be tricky, and even though I have a lot of expe­ri­ence with it, it does­n’t always work out for me either. You should always use the grow­ing end of the vine, cut at least 40cm, but best is more like 90cm or more. Remove about 10cm from the tip. The tip won’t keep grow­ing, it will just die any­way. Then leave 1 leaf on the tip end of the vine and remove all the remain­ing leaves, being care­ful not to dam­age the nodes. When it sprouts, it will be from one of those nodes. Let the pre­pared vine dry out for a day, then place it under the mulch, with both ends stick­ing out (this helps keep the ends from rot­ting). The end with the leaf can be tied to a sup­port for the vine to grow on. After that, just make sure the mulch does­n’t dry out too much and keep the sun off of it. Should take 4 to 6 weeks to see any growth at all, the process is very slow.

      I hope these com­ments are help­ful! Good luck.

      1. Hi Roland
        I am send­ing thanks once again, as I have tak­en your advice on pro­pogat­ing and now have some beau­ti­ful shoots happening,

        Many thanks again!
        Marguerite

        1. You’re wel­come, I’m glad it worked out for you. Those plants look very healthy!

  18. HEY ROLAND,ITS VIRGINIA,THIS IS GREAT!I HAVE JUST STARTED HARVESTING AND GOT ON TO SEE HOW TO CURE AND YOUR SITE WAS 1ST –THANKYOU-I’M JUST GETTING A FEW A DAY SO WILL FREEZE TILL I GET THEM ALL.SO WEIRD SOME ARE FLOWERING NOW.WILL KEEP YOU POSTED LOTS OF LOVE V

    1. Great to hear from you! Yeah, I got a bunch going off ear­ly here too.

  19. Hi there thanks so much for your infor­ma­tion. I have mature vines under shade and plas­tic in cen­tral Queensland Australia so also don’t have a warm win­ter I have alot of beans that I pol­li­nat­ed from October through to Novemberof var­i­ous sizes. About 15 fell off dur­ing December and January and are in the freez­er and I will exper­i­ment with your instruc­tions with those. The rest are still on the vine so they are about 5 months old. I noticed some of the petals stayed on the bot­tom of the bean and then these seemed to be grow­ing a root from this point I’ve been unable to find any ref­er­ence to this hap­pen­ing so I was won­der­ing if any­one else has expe­ri­enced this. I picked one that had a bit of scar­ing to the skin and cut it to see what was hap­pen­ing inside and all looks good with lots of seeds smells incred­i­ble just had a root sprout­ing. Thanks in advance for any info or advice.

    1. Hi Toni,

      So…how cold does it get? I would think if it stays over 10C, you’ll be OK, but pro­tect­ing them is a good idea.

      Beans that fall off ear­ly won’t cure well, the vanillin pro­duc­tion in the bean relies on a high sug­ar con­tent and an unripe bean won’t have that. The beans will take 10 months to mature.

      I’m curi­ous about this root you describe…it is nor­mal for the flower to cling to the bean for a while after pol­li­na­tion, but I’ve nev­er seen any­thing grow out of one! If you can post a pho­to I would love to see that.

Leave a Reply to Roland Cancel reply

Your email address will not be published. Required fields are marked *